4
GB
Congratulations!
With your purchase you have decided on a
high-quality product. Get to know the product
before you start to use it.
Carefully read the following instructions
for use.
Use the product only as described and only
for the given areas of application. Keep these
instructions safe. When passing the product
on to a third party, always make sure that the
documentation is included.
List of contents
1 x Back Protector Vest
1 x Instructions for use
Conventional use
If used and worn correctly the protector provides
limited protection against the consequences of
strong mechanical forces such as those caused
by a fall or impact.
For example it can reduce the extent of ab-
rasions and bruising from a fall in the area it
protects but it does not provide a guarantee of a
complete lack of physical harm!
You can find the correct size for you in the sec-
tion ‘Checking the size’.
Always use the article with suitable clothing and
other protective equipment such as a helmet and
gloves.
The article has only been tested for private use
and in accordance with DIN EN 1621-2-2014
LEVEL 1.
Technical specifications
This article is available in three sizes.
Check that you have selected the correct article
size measured on the length from your waist to
your shoulder.
Note!
Do not use the article if it does not
fit your waist to shoulder length.
Exchange it for the correct size – see the
section ‘Checking the size’.
Material: Outer fabric: 100% polyester
Hem and belt at waist: 100% SBR
Cushioning foam: Nitrile foam (NBR)
Symbols used
Date of manufacture (month/year):
07/2017
1
T-
FB
FB
: Full Back
The article is for the full back area.
Protective equipment is worn on
the back and aims to reduce the
severity of impact injuries in the
central back area and in the area
of the shoulder blades.
1:
Level 1 (performance level 1)
T-:
Passes impact test at low temperatures
Suitable for winter sports.
Compliance with the requirements of
European Directive 89/686/EEC (and
subsequent modifications) and the
harmonised technical standard EN 1621-2-2014
has been certified by the issuing agency TÜV
Rheinland LGA Products GmbH, Tillystr. 2,
D-90431 Nürnberg, Germany, Notified Body
0197.
Safety instructions
• Never leave children with the packaging
material without supervision. There is a risk of
suffocation.
• The article does not offer complete protection
from injury. This article also does not rule out
spinal injuries. Always drive safely and avoid
unnecessary risk.
• Make sure the article fits correctly: The protec-
tor must be in the middle of your spine and
must be fixed in this position using the belt.
The article must not impede or distract the
wearer. If the article does not fit properly,
it does not provide protection and can cause
additional damage in the event of an acci-
dent!
The article only offers a certain level of impact
protection to the areas of the body that it
covers.
