6
GB
Congratulations!
With your purchase you have decided on a
high-quality product . Get to know the product
before you start to use it . Carefully read the
following operating instructions . Use the product
only as described and only for the given areas of
application . Keep these instructions safe . When
passing the product on to a third party, always
make sure that the documentation is included .
Parts Overview
1
Top vent
2
Air exhaust
3
Visor mechanism
4
Slider for sun shield with safety latch
5
Front vent
6
Breath deflector
7
Visor
8
Sun shield
9
Pivoted release
10
Chin-wind deflector
11
Acoustic damping
12
Cheek pads
13
Inner Lining
14
Standard collar
15
Winter collar
16
Chin straps with snap fastener
Scope of Delivery
The scope of delivery for your helmet consists of
the following:
• Additional pair of cheek pads for individual
size adjustment
• Replacement visor
• Acoustic damping
• Winter collar
• Helmet bag
• Instructions for use
Important Information
Our helmets are manufactured in accordance
with the latest technology and are specifically
designed for motorcycling . Whether the owner
deems them to be suitable for any other use, is up
to him . Wearing a helmet does not exclude the
possibility of injury should an accident occur .
To guarantee adequate protection this helmet
must be well fitting and securely fastened . Every
helmet that is exposed to a hard blow must be
replaced .
We guarantee that this item is free of production
and material defects . The guarantee does not
apply to normal wear and tear and in case of
improper use .
Instructions for Use
Safety Advice
•
Warning!
When riding, the helmet may only be used if
the chin piece and visor are closed .
• The helmet is equipped with a hinged sun
shield, which may only be used in conjunction
with a closed visor .
• To open the chin piece, press the release (9)
and lift the chin piece up (see Fig . A) .
• To close the chin part, pull the chin section
down until it audibly locks into place .
• The helmet must fit tightly and the chin strap be
closed .
• Always ensure that there is no airflow restric-
tion inside the helmet .
• Ensure that your visor is clean and scratch-free
at all times . Exchange damaged visors for a
genuine replacement immediately .
Never use smoked visors at night or when
visibility is poor .
You are able to obtain replacement visors from
the stipulated service address for a period of
5 years from the purchase date .
Visor type: DS-MULTIX301 .
• Never modify the helmet, its structure or the
individual components .
