5
•
The helmet should be checked for visible deficiencies at regular intervals.
•
The helmet must be replaced after every hard knock, impact or deep scratch, because
these cause it to lose its protective effect.
•
Any adjustment to or removal of the original parts of the helmet can extremely impair
its protective function. The helmet may not be altered in order to make additions in a
way not recommended by the manufacturer.
•
Clean the inner padding with lukewarm water and mild soap and then let it air dry
•
High temperatures, from as low as 60° C, can seriously damage the helmet. Uneven
helmet surfaces and the formation of small blisters are signs of such damage. Do not
store behind panes of glass, e.g. in the car or close to sources of heat or warmth.
User information
1. The correct helmet position
•
The helmet must always be levelly horizontal on your head.(Fig. A)
•
If the helmet is too far forward, it can impair your vision.
•
If the helmet is too far back, your forehead is not sufficiently protected. (Fig. B)
2. Adjusting the single-hand twisting fastener
The integrated size-adjusting system can be adjusted using a turning knob at the back of
one’s head (Fig. C):
• smaller = twist clockwise
• bigger = twist anti-clockwise
3. Adjusting the strap divider
•
Open the strap divider (Fig. D)
•
The strap divider must be positioned in such a way, that the straps are taut but comfor
-
table. The strap divider must be below the ear, and the straps must not cover the ears.
•
Close the strap divider (Fig. E)
An open strap divider can lead to slipping of the helmet in the event
of an accident and thus to a loss of protection!!!
4. Adjusting the chin strap
•
The chin strap (Fig. G.3) has been adjusted correctly if you feel slight pressure when
you open your mouth.
Bicycle helmet
SP-56
Содержание 102990
Страница 3: ...A B E H C F Press Press G 1 2 3 D...
