Cristec CPS2 OEM 12V/40A, Руководство пользователя

Страница: 17 / 59

CPS2OEM60DEB.DOC 17
3.2.3 Settings for each type of battery
CPS2 OEM 12V/60A
Type of battery Switch position
SW5 SW4 SW3 SW2
SW1
Boost
Tension Phase
Boost*
Tension Phase
Floating*
TYPE-1 BAT.
Calcium Lead Tin
(e.g.: Delphi/Delco
Freedom)
OFF 15,1V 14,4V ON ON 15,1V 14,4V
TYPE-2 BAT.
Lead Sealed
OFF 14,3V 13,6V OFF
ON
14,3V 13,6V
TYPE-3 BAT.
Gelled Lead or
Calcium Lead
OFF 14,1V 13,4V OFF ON 14,1V 13,4V
TYPE-4 BAT.
Open Lead with
maintenance (free
electrolyte)
ON 13,7V 13V OFF ON 13,7V 13V
WINTERING
for TYPE-1 BAT.
TYPE-2 BAT.
TYPE-3 BAT.
OFF 14,1V 13,4V OFF ON 14,1V 13,4V
WINTERING
For TYPE-4 BAT.
ON 13,7V 13V OFF ON OFF ON
(
* )Voltage on BAT 1/BAT 2 with 10% of rated current and a tolerance of +/- 1%
Voltage on BAT D = BAT 1 or BAT 2 – approx. 0.4V
3.2.4 Settings
The charger's factory settings are:
TYPE-2 BAT. Sealed Lead (see table above)
BOOST in ON position
The installer should set the switches (excluding input and off-load output voltage) and possibly adjust the output voltage
using potentiometer RV1 accessible from outside at the bottom of the charger (use the appropriate tool to turn the screw
of the potentiometer), depending on:
-
the type of battery (contact the battery manufacturer if necessary)
- intended usage
- the cross-section and length of the output cables
- whether or not the boost function is required
For special batteries, call in a professional installer, who will make the specific settings in accordance with the
accumulator manufacturer's specifications and according to the specifics of the installation.
Cristec disclaims any liability in case of damage to batteries or ineffective recharging.