background image

Chapter 1-Introduction  

2  

• 

UCommand UC-515, Universal LCD Remote Control 

• 

This User’s Guide 

• 

Reference Card 

• 

Registration Card 

If any of the above items are missing or appear damaged, 
contact your dealer immediately. Do not throw the shipping 
carton away in case you need to ship your UCommand back 
to your place of purchase. 

UCommand UC-515 Features 

This section provides an overview of the key features of 
UCommand. For more information on getting the most from 
these features, refer to 

Chapter 2

• 

Large touch screen display with automatic backlighting for 
visibility in dim lighting  

• 

Adjustable backlight with four levels of ambient light sensitivity  

• 

Extensive, programmable Macro functions: each macro can 
store up to 25 commands on any command button  

• 

Offers eight customizable device layers including TV, 
DSS/Satellite/Cable, Tape/Tuner, CD/DVD, Amplifier, LD/VCD, 
VCR  

• 

Specialized learning function makes mapping and configuring 
from other remote controls quick and easy by capturing their 
infrared (IR) signal codes. 

• 

No hassle with device codes; learns every IR device 

• 

Long battery life (4 - 5 months for typical use) thanks to 
intelligent power saving functions  

• 

Settings held in non-volatile flash memory. Keeps your 
configuration when batteries finally drain 

• 

No mechanical buttons that can wear out or get dirty 

• 

Beep tone confirmation (can be switched off)  

• 

Elegant design 

Содержание UCommand UC-515














































Отзывы: