background image

 

OPERATING INSTRUCTIONS 

 
ARM / DISARM using OEM REMOTE (Requires databus module)

 

This option allows the OEM factory remote to Arm and Disarm the alarm system when you lock and unlock the 
doors.  This  feature  only  works  on  newer  CANBUS  vehicle  using  a  Data  Module  that  supports  this  feature. 

Default = Off.

 

 

2

nd

 AUX. OUTPUT : (Remote AUX 2 Output, Option # 16) 

This  requires  programming  option  #16.  Consult  your  dealer  for  availability  on  your  vehicle.  To  activate  the 
Second auxiliary output, Press and hold the Unlock and Trunk Button at same time. 

 

 

DOME LIGHT ILLUMINATION (OPTIONAL) 

This feature turns on the vehicles dome light upon disarm for 30 seconds or until the key is inserted and turned 
on.  This will provide illuminated entry to your vehicle at night or in dimly lit areas for added safety and security.  
Note that dome light illumination will deactivate the active rearm feature if programmed for active rearm. 

 
PRE-WARNING SHOCK PROTECTION & SENSOR ADJUSTMENT 

If a low-level shock to the vehicle is detected, pre-warning protection will activate sounding 5 quick siren chirps 
and 1 light flash. If a hard impact is detected the shock sensor will trigger the alarm system for 20 seconds. The 
sensor can be adjusted as needed by turning the adjustment screws clockwise to increase or counter-clockwise 
to  decrease  the  sensitivity.    The  sensor  is  also  equipped  with  2  small  indicator  lights  to  ease  the  adjustment 
process.  Blue light = Pre-warning disturbance (5 siren chirps).  Red light = A full alarm trip. 
 

ALARM TRIGGERING 

If there is an intrusion into the vehicle or hard impact to the body will sound the alarm and flash the lights for 60 
seconds.  After 60 seconds the system will automatically shut off and re-arm to continue to protect the vehicle.  
If a door is left open, the unit will cycle a second time, bypass the door and still continue to protect the other un-
tampered zones. 

 
OPEN ZONE ALERT/BYPASS 

If the system detects a faulty or open zone (Door, trunk left open) when the system is ACTIVELY ARMED, the 
siren will chirp 3 times along with 3 light flashes.  The faulty zone will be automatically bypassed. 
 
 

Содержание SP-202

















Отзывы: