CrimeStopper RS-900ER.III, Руководство по установке

Страница: 7 / 13

POWER DOOR LOCK WIRING
AFTERMARKET MOTOR/DOOR LOCK WIRING REVERSE POLARITY DOOR LOCK WIRING
GREEN
GREEN
FUSED
FUSED
RED RED
+12V
+12V
BLUE
BLUE
+
+
86 85 86 85
86 85
86 85
87 87
87 87
30 87A 30 87A
30 87A 30 87A
+
L CUT
UL
CUT
MASTER
SWITCH
“SMART” TACHLESS MODE
This RS900 Series III includes custom monitoring circuitry allowing the unit to start an engine without the use of a Tach
Wire. The module actively monitors the vehicle over the life of the installation regardless of weather or battery conditions.
The “Smart” Tachless Mode circuitry allows the RS-900 System to compensate for most conditions over life of the vehicle
while adjusting by itself for optimum starting capabilities.
IMPORTANT NOTE: Vehicles with more than one battery may give out inconsistent voltage readings. This may result in
poor performance when using “Smart” Tachless Mode. Use a Tach wire and program a Tach source when installing an
RS-900 Series III on vehicles using 2 [or more] Batteries.
TO SET SMART TACHLESS MODE: (No Tach Wire Required)
1) DO NOT START VEHICLE! Turn IGN ON, turn HEADLIGHTS ON and FAN BLOWER for 2-3 minutes to drain off
excess surface charge on the vehicle’s battery.
2) After 2-3 minutes, connect the (2) RED +12V input wires to the Module.
3) The unit will automatically read and program itself for your vehicle when voltage is applied.