OPTION PROGRAMMING
This system has several installer programmable features as listed in the chart below.
Option Programming:
1. Open hood (Gray wire grounded)
2. Turn Key to the ON position
3. Press program / valet button 5 times, after a few seconds the unit will flash the lights 5 times.
4. Push the valet/program button [again] the number of times that corresponds to the option number desired. You
should get a light flash after each button press. See chart below for option list.
5. A)
For RS900 ER III:
When you reach the desired programming level, Press button #1(Lock) or #2 (Unlock) to
change the option. See the chart below for option values and descriptions. See chart below.
5. B)
For RS901 III:
(No remotes) Tap the brake pedal once to change the option (Same as pressing Button 1 on a
remote). To reset the option back to Default, tap the brake pedal 2 times (Same as pressing Button #2 on a
remote)
6. Turn Ignition OFF, Close hood and check for changed features. Change each option individually repeating STEPS
1-5 above.
OPTIONS CHART
Option # Option Description
Option Values
Button #1
LOCK
Button #2
UNLOCK
(Default)
1
Autolock with Ignition
On or Off.
ON
OFF
2
Door Lock Pulse Time 0.75 Sec. (Standard) OR
3.0 Sec. (European Vacuum)
3 Sec.
0.75 Sec.
3
Double Unlock Pulse
ON or OFF
ON
OFF
4
Tach Learning
See Tach Reference
Programming
Learn Tach
5
Remote Start Engine
Run Time
Button #1 = 12 Min.
Button #2 = 24 Min.
Button #3 = 36 Min.
Button #4 = 48 Min.
12 Min.
24 Min.
6
Option reset
Button #2
Reset ALL to
Default
7
OEM Interface
Remote Start w/Single Pulse or 3
Pulses on Green input wire
3 pulse
1 Pulse
8
Passive Starter Disable ON or OFF
ON
OFF
Содержание RS-900ER.III
Страница 13: ......
