RS900ERIII/RS901III
SERIES
III
REMOTE ENGINE STARTING SYSTEM
INSTALLATION INSTRUCTIONS
PRE-INSTALLATION CONSIDERATIONS
To ease and reduce installation time, we suggest you consider the following points before starting:
1. Determine most suitable locations for all components to be placed. These components include: the module itself,
valet/program button, possible relays, and antenna/receiver (RS900ER III only).
2. Allow enough wire to create a service loop with strain relief, should servicing be required. This will also allow easier
access and mounting.
3. Use a Volt/Ohm meter to test and locate all connections. Test Lights can damage a vehicle’s computer systems.
4. Record all color codes of vehicle wiring to be used for reference. This will save time by not having to re-test the same
wires over again.
5. Additional Parts, which are not included with this unit, may be needed for your particular vehicle. These items may
include extra relays, Anti-Theft System Bypass modules, or Transponder Bypass modules.
TECHNICAL SUPPORT: 1-800-998-6880
Monday - Friday 8:00am - 4:30pm Pacific Time
Web Site: www.crimestopper.com
E-mail: [email protected]
CRIMESTOPPER SECURITY PRODUCTS, INC.
This device complies with FCC Rules part 15. Operation is subject
to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any
interference that may be received, including interference that may
cause undesired operation. The manufacturer is not responsible
for any radio or TV interference caused by unauthorized
modifications to this equipment. Such modification could void the
user’s authority to use the equipment.
Содержание RS-900ER.III
Страница 13: ......
