6
USING THE 1-WAY REMOTE
#3
#1
#2
#4
LOCK
TRUNK
REMOTE
UNLOCK
VEHICLE 2
FLASHLIGHT
START
#5
The transmitter supplied with the EZEE Start system contains four buttons, flashlight, and vehicle 2 switch. The
button configuration of the EZEE Start system is Factory-set and unchangeable. See Page 16 for additional
information on how to use your remote to operate a second vehicle equipped with a EZEE Start system.
NOTE: BUTTON #4 and #3 Remote Start/Trunk
There is a deliberate delay or 2 presses (Optional) built into the system on button #4 and #3 to help prevent
accidental remote starting from the remote being in your pocket or purse. During normal use, if you press button #4
or #3 too quickly, the system may not start the engine or open trunk.
OPERATION:
BUTTON 1 (Lock Symbol):
·
Press and release to Lock doors.
·
Press and Hold for more than 3 seconds to
activate “Panic” feature.
BUTTON 2 (Unlock Symbol):
·
Press and release to Unlock doors.
BUTTON 3 (Trunk Symbol):
·
Press and Hold for two seconds to activate
trunk pop (Optional Feature).
BUTTON 4 (Start):
·
Press and Hold for two seconds to Start/Stop
Engine
BUTTON
5 (Side button)
§
Press and Hold for 5 second to switch to
vehicle #2.
FLASHLIGHT
·
Press to use built-in flashlight.
Replacement Battery
GP23A (12volt)
#3
#1
#2
#4
LOCK
TRUNK
REMOTE
UNLOCK
VEHICLE 2
FLASHLIGHT
START
#5
