SETTING THE CLOCK (2-WAY- LCD REMOTE)
EZ-74 TW1
1. Press the
Recall
button #5 on the side of the remote control 5 times.
2. The remote will beep and the
AM or PM
display will begin flashing.
3. Press the
Lock
button #1 to
increase
time.
4. Press the
Unlock
button #2 to
decrease
time.
5. Press the
Trunk
button #3 to go to the next item
–
AM - PM - Hour- Minutes
.
6. Press the
Start
button #4 to
Disable or Enable Beep.
7. Press the
Recall
button #5 to
Exit Setup
or wait 7 seconds, the LCD light will turn off.
EZ-84FM/95FM
1. Press and hold all 4 buttons of remote control for approximately 3 seconds until remote beeps.
2. The minute display will begin flashing. Use the lock and unlock button to change the minute up or down to the correct time
and then press button #3 (Trunk) to set the minute value.
3. The hour display should begin flashing. Use the lock and unlock button to change the hour up or down to the correct AM or
PM hour.
4. Once the correct time is displayed, wait 6 seconds, the remote will beep twice and the time of day is set.
www.crimestopper.com
© 2005 Crimestopper Security Products
ONLINE TECHNICAL SUPPORT
http://www.crimestopper.com/index3.html
