OPTION PROGRAMMING
Follow steps below to access Programming Options:
1. Turn the ignition on and press the override/program button 5 times within 5 seconds. You will hear a (2) Second
confirmation chirp from the siren.
2. Within the next 5 seconds press the override/program button [again] the number of times that corresponds to the
listed feature below. The siren will chirp once for each button press.
3. Once you are at the desired option number, press Button (I) or (II) on the remote to change the option. Button (I)
gives on light flash/chirp and Button (II) give two flashes/chirps. See chart below for option selections. Turn OFF
Ignition.
4. Change ONE option at a time and repeat steps 1-3 as needed.
PROGRAMMING OPTIONS CHART
Option # Option Description
Selection
Button 1
Button 2
Factory
Default
1.
Passive Arming
ON or OFF
ON
OFF
ON
2.
Passive Locks
ON or OFF
OFF
ON
OFF
3.
Active Re-Arm
ON or OFF
ON
OFF
ON
4.
Silent Arm/Disarm
ON or OFF
OFF
ON
OFF
5.
Double Unlock Pulse
ON or OFF
OFF
ON
OFF
6.
Door Lock Pulse Time
0.7 Sec. or3 Sec.
0.7 Sec.
3 Sec.
0.7 Sec.
7.
Ignition Controlled Locks
ON or OFF
ON
OFF
ON
8.
Enable/Disable Cold Start
ON or OFF
OFF
ON
OFF
9.
Cold Start Interval Time
Every 2 Hrs. or 1 hr.
2 Hrs.
1 Hr.
2 Hrs.
10.
Disarm with Aux. Feature
Activation (Trunk Pop)
ON or OFF
OFF
ON
OFF
11.
Chirp Countdown w/Passive
Arming
ON or OFF
OFF
ON
OFF
12.
5/60 Sec. Door Open Warning
Button #1 = 5 Sec.
Button #2 = 60 Sec.
5 Sec.
60 Sec.
5 Sec.
13.
Remote Start Run Time
Button #1 = 15 Min.
Button #2 = 25 Min.
15 Min.
25 Min
15 Min.
14.
Doors Lock with Remote Start
ON or OFF
OFF
ON
OFF
15.
Lock After Aborted Remote Start ON or OFF
ON
OFF
ON
16.
Parking Lights ON w/Disarm
ON or OFF
OFF
ON
OFF
