CrimeStopper CS-2003DC II Series Скачать руководство пользователя страница 14

OPERATING INSTRUCTIONS 

 

PROGRAMMABLE SILENT ARM/DISARM MODE 

The system can be silently armed and disarmed as normal with Lock/Unlock Buttons, but no siren chirp.  See 
alarm programming option (8) to enable or disable this feature. 

 

EMERGENCY OVERRIDE / DISARM 

If you have lost the transmitter or it stops working for any reason and the Alarm is armed, you will have to 
open the door with the key, which will activate the alarm.  Turn the ignition on and press the override/program 
button 4-5 seconds (until siren stops).  The Alarm will disarm and enter the Valet mode, which allows you to 
use the vehicle until you can repair/replace the remote transmitter or have the alarm system checked. 

 

EMERGENCY DISARM WITH CUSTOM OVERRIDE 

If you have programmed your system for Custom Override, follow the same steps above (Emergency 
Override) while pressing the valet button 2-15 times as you have programmed.  Continue to hold the button on 
the last press for 5 seconds.  The Alarm will disarm and enter the Valet mode, which allows you to use the 
vehicle until you can repair/replace the remote transmitter or have the alarm system checked. 

 

VALET MODE 

To disable the Alarm system for vehicle service or otherwise, turn the ignition on and press the 
override/program button 4-5 seconds until the dash LED turns on solid and you hear (1) siren chirp.  Repeat 
the process to exit VALET mode and the system will chirp (2) times and the LED will turn off.  Lock/Unlock and 
AUX features will still operate in when in VALET mode. 

 

PASSIVE ARMING / PASSIVE LOCK MODES / PASSIVE CHIRP COUNTDOWN 

If programmed, passive (Automatic) Arming will occur 30 Seconds after the ignition is turned off and the last door has 
been closed.  The LED will begin flashing rapidly while counting down.  If a door is reopened, the system will wait (LED 
solid) for the door or zone to close before arming.  The unit will chirp once and flash the lights once. Doors will lock if 
passive locking is selected.  May qualify for insurance discounts-check with your agent or proprietor.  When the Unit is 
programmed for Passive Chirp Countdown, the siren will chirp during passive countdown, as an audible warning that 
arming will occur.  This siren will emit a chirp every 2 seconds as soon as the last door is closed until the system arms 
30 seconds later. 

 

PRIOR INTRUSION ALERT 

If the system was tripped in your absence, the dash LED will be flashing rapidly.  When the system is disarmed you will 
hear 3 chirps (and 3 light flashes).  Carefully inspect your vehicle to see if there is any damage or a theft has occurred. 

 

DOME LIGHT ILLUMINATION (OPTIONAL) 

This feature turns on the vehicles dome light upon disarm for 30 seconds or until the key is inserted and turned on.  
This will provide illuminated entry to your vehicle at night or in dimly lit areas for safety and security. 

Содержание CS-2003DC II Series



















Отзывы: