14
OPERATING INSTRUCTIONS (REMOTE OPERATIONS)
ONE WAY SIDEKICK REMOTE:
The transmitter supplied with the CS-2000DPII-TW2 system
has four buttons. The button configuration of the CS-
2000DPII-TW2 is Factory-set and unchangeable. See
second vehicle operation for additional information on how
to use your remote to operate a second vehicle equipped
with a OnGuard system.
BUTTON FUNCTIONS
BUTTON 1(Lock Symbol):
•
Press & release to Arm/Lock system.
•
Press & Hold for more than 3 sec. to activate “Panic” feature.
•
When ignition on – door locks.
BUTTON 2 (Unlock Symbol):
•
Press & release to Disarm/Unlock system, or reset a
cycle.
•
When ignition on – door unlocks.
BUTTON 3 (Trunk Symbol):
•
Press & Release to activate trunk pop (Aux. output #1)
•
Press for 2 seconds for CarJack option 13 and 14 must
be programmed.
BUTTON 4 (Silent Symbol):
•
Press & release for silent arm/silent disarm.
•
Press & hold for more than 3 seconds to activate Aux #2.
•
When arming within 5 seconds press and hold for 2 seconds to sensor disable.
2
nd
–VEHICLE Mode:
Your remote may have a push-button on the side for 2-car operation. Please read the
following: Your remote must be programmed to the second vehicle first. Press the side button on your remote
first, and within 3 seconds, press any of the 4 function buttons on your remote. You can keep pressing
function buttons to control car #2 as long as it is within the 3-second window. After 3 seconds have elapsed,
the remote will revert back to Car #1 control
VEHICLE #2
Press side button
first, then you have
4 seconds to
control vehicle #2.
SLNT
#3
#1
#2
#4
LOCK
TRUNK
SILENT ARM
UNLOCK
FLASHLIGHT
(AUX #1)
VEHICLE #2
(AUX #2)
& DISARM
SLNT
