background image

 
 

 

 

RS900/RS901  

COOLSTART  SERIES VI

 

RS999 FM / TW1 2-WAY PAGING SYSTEM 

 

 

REMOTE ENGINE STARTING SYSTEM 

 

INSTALLATION INSTRUCTIONS 

 
 

INTRODUCTION 

 

Congratulations on your choice of a Crimestopper CoolStart™ remote engine starter!  This installation Handbook covers 
the following models: RS900 VI Remote Start & Keyless Entry System, RS901 Upgrade/Expansion module (No remotes 
or antenna), and the 2-Way RS999FM/TW1 system with 2-Way FM paging technology. 

 

This installation book is designed for the installer or individual with an existing understanding of automotive electrical 
systems, along with the ability to test and connect wires for proper operation.  

To ease installation, we suggest that you 

READ THIS MANUAL before beginning your installation.  This book is provided as a GENERAL GUIDELINE  and the 
information contained herein may differ from your vehicle. 

 

DISCLAIMER: 
Crimestopper Security Products, Inc. and its’ vendors shall not be liable for any accident resulting from the use of this 
product.  This system is designed to be professionally installed into a vehicle in which all systems and associated 
components are in perfect working condition. 

This device complies with FCC Rules part 15.  Operation is subject to 
the following two conditions:  (1) This device may not cause harmful
interference, and (2) This device must accept any interference that 
may be received, including interference that may cause undesired 
operation.  The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this equipment. 
 Such modification could void the user’s authority to use the
equipment.

 

 

 

 

 

TECHNICAL SUPPORT: (800) 998-6880 

Monday - Friday 8:00am - 4:30pm Pacific Std. Time 
Web Site: www.crimestopper.com 
E-mail: [email protected] 

 

CRIMESTOPPER SECURITY PRODUCTS, INC. 
1770 S. TAPO STREET, SIMI VALLEY, CA. 93063 

 

REV A  06.2003 

Содержание COOL START RS-900





























Отзывы: