0DQXDO/LWH
ZZZP\FULFNHWFRP
ZZZP\FULFNHWFRP
0DQXDO/LWH
Before Using TXTM8
•
When you charge the battery with the phone power off, you will see a charging status screen. You cannot operate
the phone until it is powered on.
•
The battery is not fully charged at the time of purchase. Fully charge the battery before use.
•
It is more efficient to charge the battery with the handset powered off.
•
Battery operating time gradually decreases over time.
•
If the battery fails to perform normally, you may need to replace the battery.
BATTERY HANDLING INFORMATION
DO’S
• Only use the battery and charger approved for use with the TXTM8.
• Only use the battery for its original purpose.
• Try to keep batteries in a temperature between 41 °F (5 °C) and 95 °F (35 °C). If the battery is
stored in temperatures above or below the recommended range, give it time to warm up or cool
down before using.
• Store the discharged battery in a cool, dark, and dry place.
• Purchase a new battery when its operating time gradually decreases after fully charging.
• Properly dispose of the battery according to local laws.
DON’TS
• Don’t attempt to disassemble the battery – it is a sealed unit with no serviceable parts.
• Don’t accidentally short circuit the battery by carrying it in your pocket or purse with other
metallic objects such as coins, clips and pens. This may critically damage the battery.
• Don’t leave the battery in extremely hot or cold temperatures. Otherwise, it could significantly
reduce the capacity and lifetime of the battery.
• Don’t dispose of the battery by placing into a fire.
Before Using TXTM8
If the battery is not correctly placed in the compartment, the handset will not turn on and/or the battery may detach
during use.
REMOVE BATTERY
.
To remove the battery cover, push down the top of the battery cover slot with your finger tip
and slide the battery cover out from the unit.
.
Push the bottom of battery upwards while inserting your finger into the slot (1) and remove (2)
the battery.
.
Replace the battery cover by sliding the battery cover up until it snaps into place.
CHARGING YOUR BATTERY
.
To charge the phone, open the Charging/Data Jack cover on the right side of the phone, and
connect the charger adapter. Plug the other end into a standard outlet.
.
To remove the adapter connection, squeeze the adapter’s side buttons (1) and pull (2).
;
;
X
Y
CORRECT
INCORRECT
CORRECT
INCORRECT