Cricket Arduino Walking Robot, Документация

Страница: 65 / 94

65 – Cricket Robot Documentation
The feelers with feeler switch actuators have
been assembled for you. You must only add the
small glass bead and bend the feeler to shape.
The bead protects people and animals from
being poked by the sharp end of the feeler. You
may also bend the end of the feeler into a tiny
loop if you don’t want to use the bead.
Slide a supplied glass bead onto the feeler. Add a small drop of the supplied glue (or Crazy Glue) to
the end of the wire and then carefully slide the bead into the glue. Let this dry before handling further.
Note: The bead protects people and animals from getting poked by the sharp wire. As an
alternative you may simply bend a small loop into the end of the feeler wire.
Completing the Feelers