Cretors DIPLOMAT 20 Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 56

background image

DI20-32-M-A-E-O 2011.04.14

DI20-32-M-A-E-O 2011.04.14

9

BEGINNING SERIAL NO. 07093822

4.

The kettle either has a polished nickel finish or is a polished stainless steel finish and is
very easy to clean if oil is not allowed to burn.  After the final popping, the best practice
is to wait until the oil just begins to solidify, then take a cotton towel or absorbent rag and
wipe the kettle.  Once the oil is allowed to completely solidify, it can become more
difficult to remove.  We recommend coconut oil for your Cretors popper; it will not stick
or burn as easily as other oils.

5.

A thorough cleaning every week with CKC cleaning compound is recommended.  This
will prevent the accumulation of carbon on the bottom and internal sides of the kettle.
When boiling the CKC cleaning compound in the kettle, do not fill the kettle with more
than ¾” high of water inside the kettle.  If the kettle has been overheated or oils that tend
to carbonize are used the normal cleaning procedures may not suffice.  Increase
frequency as needed.

Cretors has developed a cleaning kit for your Diplomat machine. The kit is sold separately under
P/N 10831. If you need more information, please feel free to contact your local distributor or call
Cretors at 1-800-228-1885.

6.

Cretors Outside Kettle Cleaner COC should be used periodically to remove popping oil
that may become baked on to the outside of the kettle.

7.

The kettle agitator assembly should be removed weekly for thorough cleaning. The
stirrer blade is disassembled by removing the spring pin that goes through the top of the
stirrer blade. Lift off the stirrer blade.

8.

Clean all parts thoroughly, making sure to use CKC. Do not use any harsh abrasives or
cleaning materials.

9.

In addition to CKC and COC Cretors has two very effective aerosol cleaners available.
Carbon OFF in the blue can is to be used to clean a cold kettle. The red can should be
used with a warm kettle. Read the directions on the cans.

10.

Reassemble in reverse order, following the directions given.

B.

Cabinet

1.

Remove and empty the waste clean-out drawer daily or whenever it is full. Under heavy
use this may need to be done more often.

Failure to empty the drawer and to clean cabinet may result in a fire hazard due to
restricted airflow from the cornditioner.

2.

The cabinet glass and cabinet base can be cleaned with any good grade glass or
household cleaner suitable for glass and plastic surfaces. The inside of the cabinet can be
cleaned with the same cleaner as the outside, if it is the type that has a cleaning agent to
cut the oil remaining from the popping operation, and it is acceptable for food contact
surfaces. Do not soak unit with water. Avoid wetting the inside of electrical enclosure.

«
...
7
8
9
10
11
...
»

Содержание DIPLOMAT 20

























































Отзывы:

Нет отзывов

Похожие инструкции для DIPLOMAT 20

Бренд: Rational Страницы: 112

Бренд: Xavax Страницы: 2

Бренд: Kitchen Monkey Страницы: 8

Бренд: Rommelsbacher Страницы: 20

Бренд: Hallde Страницы: 33

Platinum WC46PLDZ5

Бренд: Wine Cell'R Страницы: 21

Бренд: Emeril Lagasse Страницы: 12

Бренд: Olympia Страницы: 40

Бренд: anko Страницы: 12

Бренд: Premium Страницы: 12

Бренд: Prima Страницы: 10

Бренд: Gemini Страницы: 16

Бренд: Bosch Страницы: 24

Fornuis HGV423124N

Бренд: Bosch Страницы: 48

HMB5050 - 2.1 cu. ft. Microwave

Бренд: Bosch Страницы: 36

Бренд: Bosch Страницы: 68

Бренд: Bosch Страницы: 92

Бренд: Bosch Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды