Configure
The UC Engine and conference device are both configurable via
their web configuration interfaces. The web configuration
interface is used to view and configure various device settings.
To access their web configuration interfaces, enter their IP
addresses into a web browser as described in the following
sections.
Apply Power
Press the power button on the bottom of the UC Engine and apply
power to all of the other devices in the system.
Configure the Conference Device
NOTE:
If a Direct Connection was made between the conference
device and the UC Engine, skip to
.
1. On a computer, open a web browser to the IP address found in the
conference device's settings.
NOTES:
l
The device and computer must be on the same network switch
and VLAN.
l
A login with administrative rights for the device is required.
2. Log in to the device and navigate to DEVICE > Applications.
3. Enter the following information in the appropriate fields:
l
Teams Video PC Address: Enter the IP address or hostname of the
UC Engine.
NOTE:
The hostname is printed on a label affixed to the UC
Engine.
l
Teams Video PC Port: By default, port number 49500 is used. If a
different port number has been configured on the UC Engine,
enter that port number instead.
l
Teams Video Username: Enter the login username for the UC
Engine. (The default username is “admin”.)
l
Teams Video Password: Enter the login password for the UC
Engine. (The default password is “sfb”.)
4. Click Save Changes.
Update Firmware
Ensure that all devices are running the latest firmware. Firmware
updates for the UC-MM30-A-T system are performed via the UC
Engine's web configuration interface.
To manually update the device firmware:
1. Enter the device's IP address or host name into a web browser. The
host name is located on a sticker affixed to the UC Engine. The IP
address can be found using the device discovery tool in Crestron
Toolbox™ software.
2. Sign into the configuration interface. If this is the first time signing in,
assign the device a new username and password. Do not lose the
username and password. If you do, then you will have to factory reset
the device.
3. Select Actions > Update Firmware. Upload the latest firmware file.
5
UC-MM30-A-T
Quick Start
Crestron Flex Tabletop Small Room Video Conference System with Android™ Compute Appliance for
Microsoft Teams® Rooms
Preliminary
