Multi-Surface Mount Kit for TSW-730
Crestron
TSW-730-MSMK
6
•
Multi-Surface Mount Kit for TSW-730: TSW-730-MSMK
Installation Guide – DOC. 7415A
Separate Back Cover of Touch Screen
Insert screwdriver to separate back of touch screen
NOTE:
If installed, the two security screws must be removed
before separating the back cover of the touch screen.
7.
Insert the plastic cover (2024491 or 2024492) into top or bottom of the
plastic enclosure (20334411 or 2033442). Installation location of the plastic
cover is determined through the location of the raceway. For example, if the
raceway is to be run to the top of the plastic enclosure, install the plastic
cover in the bottom of the plastic enclosure.
8.
Run the network wiring through the hole in the back of the plastic
enclosure.
9.
Attach the plastic enclosure to the glass mounting plate using the 1/4” hex
driver and the four included #04-40 hex nuts (2004878). Observe the
orientation of the
TOP
screening to ensure proper installation of the plastic
enclosure. Refer to the following illustration.
Plastic Enclosure Mounting Using Glass Mounting Plate
Glass Mounting Plate
(4516855)
Glass
Plastic Cover
(2024491 or 2024492)
Plastic Enclosure
(2033441 or 2033442)
Nut (4) #04-40 Hex
(2004878)
