Multi-Surface Mount Kit for TSW-730
Crestron
TSW-730-MSMK
10
•
Multi-Surface Mount Kit for TSW-730: TSW-730-MSMK
Installation Guide – DOC. 7415A
2.
Run the network wiring through the hole in the back of the plastic
enclosure.
3.
Attach the plastic enclosure (2033441 or 2033442) to the angle mounting
bracket with the four included #04-40 x 1/4” Phillips head screws
(2007161), as shown in the following illustration. Observe the orientation of
the
TOP
screening to ensure proper installation of the plastic enclosure.
Attach Plastic Enclosure to Angle Mounting Bracket
Glass Mounting Plate
(4516855)
Glass
Plastic Enclosure
(2033441 or 2033442)
Angle Mounting Bracket
(2033272 or 2033273)
Screw (4) #04-40 x 1/4”
(2007161)
NOTE:
When raceway is run to the bottom of the touch screen, the plastic
cover must be placed in the top of the plastic enclosure. When raceway is
run to the top of the touch screen, the plastic cover must be placed in the
bottom of the plastic enclosure.
4.
Attach the RJ-45 connector of the network wiring to the touch screen and
then install the touch screen by carefully pressing it into place. While
snapping the unit into place, pull the network wiring to remove slack. Refer
to the following illustration.
