Crestron
TPS-RFGWX
Two-Way RF Transceiver
Operations Guide - DOC. 5847A
Two-Way RF Transceiver: TPS-RFGWX
•
15
NOTE:
The parameters shown in the illustration above are the port settings for a 2-
Series control system. Consult the Operations Guide for the control system being
used for exact parameter selection.
4.
To verify communication, select
Diagnostics | Establish
Communications (Find Rack)
. This should display a window that
gives the COM port and baud rate. If communication cannot be
established, refer to the “Troubleshooting Communications” section
in the respective Operations Guide for the control system.
Firmware Upgrade
A firmware upgrade file has
the extension .csf.
To take advantage of all the TPS-RFGWX features, it is important that the unit
contains the latest firmware available. Please check the Crestron website
(
http://www.crestron.com/downloads/software_updates.asp
) for the latest version of
firmware. Not every product has a firmware upgrade, but as Crestron improves
functions, adds new features, and extends the capabilities of its products, firmware
upgrades are posted. To upgrade the firmware, complete the following steps.
1.
Make sure that “Communication Settings,” which begins on page 13,
has been performed.
2.
As shown after this step, select
File Transfer | Load Network
Device
from the Viewport menu bar.
File Transfer | Load Network Device Command
Содержание TPS-RFGWX
Страница 1: ...Crestron TPS RFGWX Two Way RF Transceiver Operations Guide ...
Страница 4: ......