Crestron TPS-ENETL, Руководство по эксплуатации и установке

Страница: 23 / 32

Crestron TPS-ENETL Ethernet Card for TPS/Lectern Panel
Password Windows
5. Observe the Viewport connect to the touchpanel.
Programming
You can create a program that allows you to control the TPS-ENETL
equipped TPS touchpanel via Ethernet through a Crestron control system
using the Crestron programming tools Crestron Application Builder™
(AppBuilder) and SIMPL Windows. These tools are intended for users
with different levels of programming knowledge. The flexibility of each
tool is proportional to the degree of programming expertise (i.e., the more
flexible, the more a programmer needs to know and account for). Of
course, one can initiate programming using the easiest method (Crestron
AppBuilder) and use advanced techniques that are available from SIMPL
Windows to customize the job.
The following are recommended software version requirements for the
PC:
•
SIMPL Windows version 2.01.06 or later. Requires SIMPL+
Cross Compiler version 1.1.
•
Crestron Database version 15.7.4 or later.
•
Application Builder version 1.0.17 or later. Requires SIMPL
Windows.
Programming with the Crestron AppBuilder
The easiest
method of
programming,
but does not
offer as much
flexibility
as SIMPL
Windows.
The Crestron AppBuilder offers automatic programming for such
residential and commercial applications as audio distribution, home
theater, video conferencing, and lighting. The interface of this tool guides
you through a few basic steps for designating rooms and specifying the
control system, touchpanels, devices, and functionality. The Crestron
AppBuilder then programs the system, including all touchpanel projects
and control system logic.
Operations & Installation Guide - DOC. 6013 Ethernet Card for TPS/Lectern Panel: TPS-ENETL
•
19