background image

Crestron 

TPMC-4SMD

 

 

4.3” Designer Touch Screen

 

 

Smart Graphics also includes the Smart Sizing™ feature, which allows the 
same user interface to be viewed on different size screens. 

White Backlit Buttons 

The TPMC-4SMD comes standard with 10 programmable “hard key” push buttons 
for quick access to commonly used functions. Each button features a translucent 
button cap with white LED backlighting. The backlighting is fully dimmable, either 
globally or separately for the left and right side. Alternately, each button LED can be 
programmed (via SIMPL Windows) to provide discrete feedback, affording clear 
indication of the status of each individual button. 

The TPMC-4SMD comes standard with its buttons pre-labeled for typical room 
control functions. Customized labeling can be attained using Crestron Engraver 
software. For a clean appearance, either column of buttons may be removed and 
covered using the no-button covers provided. 

Proximity Sensor 

The TPMC-4SMD senses as the user approaches it, waking its display automatically 
without having to touch the screen so it is always ready for use. 

Streaming Video 

High performance streaming video capability makes it possible to view security 
cameras and other video sources over the network right on the touch screen. Native 
support for H.264 and MJPEG formats allows the TPMC-4SMD to display live 
video images from IP cameras and servers such as the Crestron CEN-NVS200 
Network Video Streamer (sold separately). 

IP Intercom 

Built-in IP intercom capability facilitates direct touch screen to touch screen 
intercom and monitoring right over the LAN without requiring any additional AV 
wiring. The TPMC-4SMD features an integrated microphone and speaker for clear 
speech communication. 

Audio Feedback 

Customized audio files can be loaded on the TPMC-4SMD to add another dimension 
to its touch screen graphics using personalized sounds, button feedback and voice 
prompts. 

Single Wire Connectivity 

A simple Ethernet LAN connection is all that is required to wire the TPMC-4SMD, 
containing all control, video, intercom and power signals in a single wire. 

Power over Ethernet 

Using PoE technology, the TPMC-4SMD gets its operating power right through the 
LAN wiring. PoE eliminates the need for a local power supply or any dedicated 
power wiring. A PoE Injector (PWE-4803RU, sold separately) simply connects 
inline with the LAN cable, allowing for installation at any convenient location. 
Crestron PoE switches (CEN-SW-POE-5, CEN-SWPOE-16 or CEN-SWPOE-24, all 
sold separately) may also be used to provide a total networking solution with built-in 
PoE. 

Operations & Installation Guide – DOC. 7027E 

4.3” Designer Touch Screen: TPMC-4SMD  

  3 

Содержание TPMC-4SMD





































Отзывы: