Crestron TPMC-4SMD, Руководство по эксплуатации и установке

Страница: 14 / 36

4.3” Designer Touch Screen Crestron TPMC-4SMD
Connectors, Controls & Indicators
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
1 Hard Keys with
Feedback/
Backlight
(10) Optional programmable push buttons,
translucent backlit with (1) white LED per
hard key, programmable for feedback and
backlighting
2 Reset (1) Recessed push button behind pinhole for
hardware reset (press and hold for four
seconds)
3 LAN PoE*
Green
LED
Yellow
LED
Pin 1
Pin 8
(1) 8-wire RJ-45 with two LED indicators;
10BASE-T/100BASE-TX Ethernet port,
Power over Ethernet compliant;
Green and yellow LEDs indicate Ethernet
port status
PIN SIGNAL PIN SIGNAL
1 TX + 5 N/C
2 TX - 6 RX -
3 RX + 7 N/C
4 N/C 8 N/C
4 Occupancy Sensor
Input
(4) Captive screw terminals comprising (2)
voltage sensing inputs (referenced to
ground) with 24 dc power output;
Input voltage range: 0-30 Vdc;
Sensing threshold: ≥ 4.5 Vdc active,
≤ 1 Vdc inactive;
Maximum dc load: 4 watts @ 24 Vdc,
provides operating power for up to (4)
Crestron GLS Series occupancy sensors
* The pin out table indicates signal connections. dc power applied by Ethernet power sourcing
equipment (PSE) can connect to either signal pins or N/C pins.
10
•
4.3” Designer Touch Screen: TPMC-4SMD Operations & Installation Guide – DOC. 7027E