Crestron TPCS-4SM, Руководство по настройке

Страница: 17 / 20

Crestron TPCS-4SM & TPCS-4SMD Touch Screen Control Systems
Touch Test
On the “Diagnostics” menu, touch Touch Test to display the touch test screen,
shown in the illustration below.
Touch Test Screen
The touch test screen contains a Calibrate button to initiate touch screen calibration
and a Return button to return to the “Diagnostics” menu.
During touch screen calibration, a crosshair appears at the center of the screen.
Touch the center of the crosshair, which then moves to the lower right part of the
screen. Touch the center of the crosshair and it moves to another part of the screen.
Continue touching the center of the crosshair until calibration is complete.
NOTE: When touching the screen during calibration, be as accurate as possible.
Use the tip of a capped pen or the eraser end of a pencil.
Touch to return to the “Diagnostics” menu.
Proximity Sensor Test
On the “Diagnostics” menu, touch Proximity Sensor Test to display the “Diagnostic
– Sensor Test” screen, shown in the illustration below.
“Diagnostic – Sensor Test” Screen
Configuration Guide – DOC. 7332A 4.3” Touch Screen Control Systems: TPCS-4SM & TPCS-4SMD
•
13