Trim Ring Mount Kits
Crestron
TMK-1000L & WMKT-1000L
Insert the Trim Plate into the Opening
TRIM PLATE
DRYWALL
MOUNTING PLATE
DRYWALL CUTOUT:
4
1
2
in WIDE x 4
1
2
in HIGH
(114 mm WIDE x 114 mm HIGH)
5. Carefully pass the mounting plate through the opening and rest it
against the interior surface of the drywall.
6. When the mounting plate is in position, bend the top two flanges of the
trim plate upward (approximately 90 degrees) and the bottom two
flanges downward (approximately 90 degrees). Refer to the illustration
after this step.
NOTE:
The mounting plate will have slight play; this is normal. It allows for minor
adjustments to the touchpanel during installation.
Bend Flanges
BEND THESE TABS UP
TABS DOWN
BEND THESE
4
•
Trim Ring Mount Kits: TMK-1000L & WMKT-1000L Installation Guide – DOC. 6063
