background image

Crestron 

STX-1700C 

 

2-Way RF Wireless Touchpanel

 

Identity Codes 

The STX-1700C touchpanel uses three distinct types of identity (ID) codes for 
recognition within a Cresnet system: Cresnet identity (Net ID), RF ID, and RF 
CHANNEL. These codes are assigned to the touchpanel from the Cresnet Interface 
Menu when the unit is configured. Refer to “Setup Menu” on page 8. For the 
touchpanel to be identified within the Cresnet system, these assignments must match 
assignments made in the SIMPL Windows project.  

Net ID 

Every equipment and user interface within the Cresnet system requires a unique Net 
ID. These codes are two-digit hexadecimal number from 03 to FE. The Net ID of the 
unit must match the Net ID specified in the SIMPL Windows program when 
operating as a wired touchpanel (optional, recommended for testing). The Net ID is 
used when the touchpanel is wired directly to the control system during uploading a 
Crestron VisionTools

®

 Pro-e (VT Pro-e) project or upgrading the touchpanel 

firmware.  

RF ID 

Every STX-1700C touchpanel communicating with a Cresnet control system via a 
STRFGWX requires a unique RF ID to secure RF communications. There are 15 
useable codes for multiple touchpanel(s) ranging from 1 to F (hexadecimal number). 
The RF ID of the unit must match the RF ID specified in the SIMPL Windows 
program. For roaming details, refer to “Modifying a SIMPL Windows Project for 
Roaming” 
on page 17. 

RF CHANNEL 

Each STX-1700C touchpanel communicating to the STRFGWX transceiver must 
have a RF CHANNEL that matches the RF CHANNEL of the STRFGWX. There 
are 16 possible RF CHANNELS ranging from 0 to F (hexadecimal number). Having 
multiple channels available allows for multiple gateways, and therefore many 
multiple touchpanels, to be used in a given project without signal interference. 

NOTE:

  A single RF CHANNEL may be used by more than one STRFGWX when 

multiple transceivers are used to expand the roaming capabilities of a touchpanel. 
For more information, refer to the latest revision of STRFGWX Operations Guide 
(Doc. 5811) available from the Crestron website (

http://www.crestron.com/manuals)

.  

 

Operations Guide - DOC. 6226A 

2-Way RF Wireless Touchpanel: STX-1700C  

  7 

Содержание STX-1700C









































Отзывы: