Crestron STX-1700C, Руководство по эксплуатации, Страница: 21 / 40

Crestron STX-1700C 2-Way RF Wireless Touchpanel
The tables below list functional descriptions for the touchpanel digital outputs and
inputs.
Digital Output Signal Descriptions
OUTPUT DESCRIPTION
press 1 through press 999 Notifies control system of button press (1 – 999).
High/1 = press On
Low/0 = press Off
Digital Input Signal Descriptions
INPUT DESCRIPTION
fb 1 through fb 999 Notifies panel of button press (1 – 999).
Analog Output Signal Descriptions
OUTPUT DESCRIPTION
an_act 1 through an_act 256 Notifies control system of an analog action (1 – 256).
Any value from 0 through 65535
Analog Input Signal Descriptions
INPUT DESCRIPTION
an_fb 1 through an_fb 256 Notifies panel of analog feedback (1 – 256).
Serial Input Signal Descriptions
INPUT DESCRIPTION
text-o1 through text-o127 Notifies panel of text string (1 – 127). Also called
indirect text.
Device Extenders
Device extenders provide additional logic and functionality to a device. The Poll
Manager and Sleep/Wake Manager symbols are device extenders for touchpanels.
For the STX-1700C in wired mode only, the Poll Manager takes the touchpanel on
and off line during polling by the control system. In wireless mode, Sleep/Wake
Manager suspends and restores operation of the touchpanel. For additional
information about Device Extenders, refer to the latest version of the Crestron
SIMPL Windows Symbol Guide (Doc. 6120), or the on-line help included with
SIMPL Windows.
Modifying a SIMPL Windows Project for Roaming
To implement roaming in a system that originally had two STX-1700Cs and one
gateway, you would need to add a STRFGWX RF gateway to your SIMPL Windows
project and add two STX-1700Cs under the new gateway in
System Views . For
simplicity, in this example we assigned the original gateway a Cresnet ID of 03 and
the original touchpanels RF IDs of 01 and 02. To extend the range, we will assign
the new gateway a Cresnet ID of 04 and add two new touchpanel symbols in the
system. These touchpanels will have the same RF IDs (01 and 02) as the original
touchpanels mentioned above. Additionally, in
Program View , you will need to
duplicate the logic for each touchpanel communicating with the original gateway and
paste it in the touchpanel symbol associated with the added gateway. For example,
the logic in the original STX-1700C symbol at RF ID 01 must be copied and pasted
Operations Guide - DOC. 6226A 2-Way RF Wireless Touchpanel: STX-1700C
•
17