CRESTRON
4
••
Relay Controller: SP-RY
Operations Guide - DOC. 5737
SP-RY with SmarTouch
™
ST-CP
Connect the 3.5 mm, Serial Data Cable (supplied) to the input port on the SP-RY.
Connect the other end of the cable to one of the outputs on the ST-CP. The cable
should be connected to the appropriate control device.
To program the ST-CP for the Relay Controller, refer to the SmarTouch STS Wizard
included with VisionTools Pro
™
or the latest revision of Crestron's SIMPL
™
Windows
®
programming software (v 1.20.04 or later) and the latest version of the
Crestron Database (v 11.7.207).
NOTE:
An external power supply must be used when using the SP-RY with the
SmarTouch ST-CP system.
Connect SP-RY to ST-CP
To Devices
Serial Data Cable
Serial Data Cable
Serial Data Cable
