Crestron QM-WMC Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 52

background image

Crestron

QM-WMC

Wall Plate Media Center

Setup is easy thanks to Crestron’s Windows



-based programming

software. Crestron’s SystemBuilder software creates a complete project,
with no special programming required. SystemBuilder completes all
necessary programming for a base system including all touchpanel
screens and the control system program. The program output of
SystemBuilder is a SIMPL Windows program with much of the
functionality encapsulated in macros and templates. Once SystemBuilder
creates the project, the system interfaces and program logic can be
customized in SystemBuilder or can be easily modified with Crestron
development tools (i.e., SIMPL Windows and Crestron VisionTools

®

Pro-e (VT Pro-e) software packages).
SystemBuilder comes with templates for all supported interfaces. If a
user wishes to create a touchpanel project using templates with a
different look-and-feel, this can be accomplished by making a custom
template. This custom template can then be used by SystemBuilder to
create the final project files to be loaded into the panels. Alternatively,
VT Pro-e can be used to tweak projects created with the SystemBuilder
or develop original touchpanel screen designs.
Once the program created by SystemBuilder is loaded into the control
system, Digital Media Tools (DMT) Software can be used to tune the
system for optimal performance. DMT software can be used to test the
quality of audio and video signals as well as fine-tune audio and video
settings.

NOTE:

Crestron recommends the use of SystemBuilder and Digital

Media Tools software for creating and fine-tuning a QuickMedia system.

NOTE:

Crestron recommends that you use the latest software to take

advantage of the most recently released features. The latest software is
available from the Downloads | Software Updates section of the Crestron
website (

www.crestron.com

NOTE

: Crestron software and any files on the website are for

Authorized Crestron dealers and Crestron Authorized Independent
Programmers (CAIP) only. New users may be required to register to
obtain access to certain areas of the site (including the FTP site).

Operations & Installation Guide - DOC. 6237A

Wall Plate Media Center: QM-WMC

•

27

«
...
29
30
31
32
33
...
»

Содержание QM-WMC





















































Отзывы:

Нет отзывов

Похожие инструкции для QM-WMC

Бренд: Wattle Страницы: 6

Бренд: Baicells Страницы: 8

Бренд: ICP DAS USA Страницы: 14

Бренд: ICP DAS USA Страницы: 25

Бренд: ICP DAS USA Страницы: 15

Бренд: ICP DAS USA Страницы: 8

Бренд: ICP Страницы: 14

Бренд: Lab.gruppen Страницы: 35

Бренд: Lanpro Страницы: 5

Бренд: Pakedge Device & Software Страницы: 20

Бренд: Paradyne Страницы: 112

Бренд: Cambium Networks Страницы: 215

Бренд: Edge-Core Страницы: 7

Бренд: Opengear Страницы: 2

IAR KickStart Kit TWR-K60N512-IAR

Бренд: IAR SYSTEMS Страницы: 8

Бренд: Roland Страницы: 2

Бренд: Realtek Страницы: 30

DM/IP601-CPCI-100BT

Бренд: Dialogic Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды