Crestron QM-MD16X16, Руководство по эксплуатации

Страница: 15 / 32

Crestron QM-MD16X16 16X16 QuickMedia™ Matrix Switcher
RJ-45 PIN
NUMBER
WIRE COLORS
(EIA 568B)
QM ASSIGNMENT: RGB
QM ASSIGNMENT:
COMPOSITE, S-VIDEO,
COMPONENT AND AUDIO
1 WHITE/ORANGE - RGB RED - CHROMINANCE (- P
r
)
2 ORANGE + RGB RED + CHROMINANCE (+ P
r
)
3 WHITE/GREEN - RGB GREEN - LUMINANCE (- Y)
4 BLUE + DIGITAL AUDIO + DIGITAL AUDIO
5 WHITE/BLUE - DIGITAL AUDIO - DIGITAL AUDIO
6 GREEN + RGB GREEN + LUMINANCE (+ Y)
7 WHITE/BROWN - RGB BLUE - COMPOSITE (- P
b
)
8 BROWN
+ RGB BLUE
+ COMPOSITE (+ P
b
)
4. For QuickMedia wiring use CresCAT-QM, CresCAT-IM, or quality CAT5e/CAT6 cable with a delay
skew of <=15ns per 100m; the maximum aggregate cable length and delay skew between any QM
transmitter (origination point) and QM receiver (endpoint) is 450 ft (137 m) and 22 ns; a maximum of
two QM midpoint devices may be inserted in a given QM signal path; exceptions apply, refer to each
respective product manual for full detail.
Industry Compliance
As of the date of manufacture, the QM-MD16X16 has been tested and found to
comply with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Operations Guide – DOC. 6538A 16X16 QuickMedia™ Matrix Switcher: QM-MD16X16
•
11