Crestron PAC2M, Руководство по эксплуатации

Страница: 20 / 32

Professional Automation Mini Computer Crestron PAC2M
Uploading and Upgrading
Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication.
While the next section provides an overview for communication, refer to
“Establishing Communications with the Control System” in the Crestron 2-Series
Control Systems Reference Guide (Doc. 6256) for connection details. If
communications cannot be established, refer to “Troubleshooting Communications”
in the same guide.
Establishing Communication
Use Crestron Toolbox for communicating with the PAC2M; refer to the Crestron
Toolbox help file for details. There are two methods of communication.
USB Communication
NOTE: Required for initial setup of Ethernet parameters.
USB Communication
PC RUNNING
CRESTRON TOOLBOX
PAC2M
USB COMMUNICATION
VIA USB CABLE
•
The COMPUTER port on the PAC2M connects to the USB port on the PC
via the included Type-A to Type B USB cable.
•
Use the Address Book in Crestron Toolbox to create an entry using the
expected communication protocol (USB). When multiple USB devices are
connected, identify the PAC2M by entering “PAC2M” in the “Model”
textbox, the unit’s serial number in the “Serial” textbox or the unit’s
hostname in the “Hostname” textbox. The hostname can be founding the
“System Info” window in the section marked “Ethernet” however,
communications must be established in order to see this information in the
“System Info” window.
•
Display the PAC2M’s “System Info” window (click the
icon).
Communications are confirmed when the device information is displayed.
TCP/IP Communication
Ethernet Communication
PC RUNNING
CRESTRON TOOLBOX
PAC2M
ETHERNET
•
Establish USB communication between PAC2M and PC.
•
Enter the IP address, IP mask and default router of the PAC2M via the
Crestron Toolbox (
Functions | Ethernet Addressing ); otherwise enable
DHCP.
16
•
Professional Automation Mini Computer: PAC2M Operations Guide – DOC. 6507