Crestron MPC-20, Руководство по эксплуатации и установке

Страница: 16 / 40

Media Presentation Controller Crestron MPC-M10/20/25
Connectors, Controls & Indicators
# CONNECTORS,
CONTROLS &
INDICATORS
DESCRIPTION
1 FEEDBACK
INDICATORS
1
Programmable red LEDs (one per hard key)
2 HARD KEYS
1
Programmable buttons with backlit label lot
3 LIGHT SENSOR Photo sensor, programmable for auto-
dimming of front panel labeling and other
functions
4 IR RECEIVER Receives signals from IR transmitter.
5 BAR GRAPH (1) Programmable red 5-segment LED bar
graph.
6 VOLUME (1) Programmable continuous turn rotary
encoder
7 COMPUTER
Pin 2 Pin 3
Pin 1 Pin 4
(1) USB Type B female (behind front cover);
USB 1.1 computer console port
PIN DESCRIPTION
1 +5 VDC
2 Data -
3 Data +
4 Ground
8 SW-R (1) Recessed miniature pushbutton (behind
front cover) for software reset (restarts the
SIMPL program)
9 NAVIGATION PAD
2
(5) Programmable pushbuttons for 4-way
directional navigation and “enter”
10 HW-R (1) Recessed miniature pushbutton for
hardware reset (reboots the processor)
11 NET (2) Sets of (4) captive screw terminals;
Cresnet port and 24 VDC power input with
parallel pass-through;
Master/Slave selectable;
24 : Power (24 VDC)
Y : Data
Z : Data
G : Ground
(Continued on following page)
12
•
Media Presentation Controller: MPC-M10/20/25 Operations & Installation Guide – DOC. 6701C