Crestron MMK-V12, Руководство по установке

Страница: 17 / 20

Crestron MMK-V12 & WMKM-V12 Mud Mount Kits
12. Use a #2 Phillips screwdriver and tighten the screws by hand so that they
slightly dimple into the holes in the mud ring plate.
13. Run the necessary cables for the touchpanel and secure them behind the
mounting surface.
14. Apply joint compound as needed to finish the cutout. Avoid covering the
six tapped mounting holes.
15. When the joint compound is dry, the touchpanel can be installed using the
six tapped holes in the mounting plate. Refer to the latest version of the
V12-WALL and WMKC-V12 Installation Guide (Doc. 6893) for
installation instructions. Refer also to the comprehensive illustration below.
V12-Wall Mounting Using WMKM-V12 (Exploded View)
Bezel
Screw (6) #06-32 x 1 1/2"
(2007254)
V12-WALL
(not included)
Mud Ring
(2025263)
Mounting
Surface
Push-on Fastener (4)
(2024121)
Adjustment Plate (2)
(2004825)
Mounting Plate (2)
(2024536)
Installation Guide – DOC. 6892A Mud Mount Kits: MMK-V12 & WMKM-V12
•
13