Crestron
MMK-2000L & WMKM-2000L
Mud Mount Kits
10. Use four standard drywall screws (of adequate length) to secure the
plate to the fastener/mounting plate assembly. The screws pass through
the clearance holes in the plate and are secured in the extruded holes of
the fastener plates.
Secure Mud Ring Plate
STANDARD DRYWALL
SCREW (NOT SUPPLIED)
QUANTITY 4
11. Verify that the plate is level before tightening.
NOTE:
Do not over tighten screws. Doing so may over-dimple or rip the plate.
12. Use a #2 Phillips screwdriver and tighten the drywall screws by hand
so that they slightly dimple into the holes in the mud ring plate.
13. Run the necessary cables for the touchpanel and secure them behind the
drywall.
14. Apply drywall joint compound as needed to finish the cutout.
15. When dry, the TPS-2000L can be installed using the four tapped holes
in the mounting plate. Refer to the latest revision of the TPS-2000L
Operations Guide (Doc. 5972) for details.
Installation Guide – DOC. 6025
Mud Mount Kits: MMK-2000L & WMKM-2000L
•
7
