Crestron
MMK-2000L & WMKM-2000L
Mud Mount Kits
4. Locate an area on the wall that is free of miscellaneous wiring and
studs.
5. Make a small hole near the middle of the designated site; verify that the
location is suitable.
NOTE:
Make the cutout as level as possible. The mounting plate allows for only
minor leveling adjustments.
6. Use the drywall saw or equivalent to produce a level, rectangular cutout
in the drywall that measures 6
3
/
8
inches wide (16.159 cm) x 4 ½ inches
high (11.389 cm).
7. Insert the symmetrical mud ring plate into the opening, as shown in the
illustration after this step.
Insert the Mud Ring Plate into the Opening
MUD
RING PLATE
QUANTITY 1
OPENING IN
DRYWALL
8. Carefully pass the fastener/mounting plate assembly through the
opening and rest the assembly against the interior surface of the
drywall. Verify that the fastener plates are between the mounting plate
and the drywall. Refer to the illustration after this step for visual
guidance.
Installation Guide – DOC. 6025
Mud Mount Kits: MMK-2000L & WMKM-2000L
•
5
