Crestron Isys TPS-12G-QM Скачать руководство пользователя | Manualshive

Страница: 60 / 70

background image

Isys

®

G-Series Touchpanels

Crestron

TPS-12G/15G/17G-QM

Uploading and Upgrading

Crestron recommends using the latest programming software and that each device
contains the latest firmware to take advantage of the most recently released features.
However, before attempting to upload or upgrade it is necessary to establish
communication. Once communication has been established, files (for example,
programs, projects or firmware) can be transferred to the control system (and/or
device). Finally, program checks can be performed (such as changing the device ID
or creating an IP table) to ensure proper functioning.

Establishing Communication

Use Crestron Toolbox for communicating with the TPS-12G/15G/17G-QM; refer to
the Crestron Toolbox help file for details. There are three methods of
communication.

Direct Serial

NOTE:

Required for initial setup of Ethernet parameters.

Direct Serial Communication

SERIAL VIA CRESTRON

CABLE STCP-502PC

OR EQUIVALENT

PC RUNNING

CRESTRON TOOLBOX

TPS-12G/15G/17G-QM

•

The

RS-232

port on the TPS-12G/15G/17G-QM connects to the serial port

on the PC via a serial cable (Crestron STCP-502PC or equivalent).

•

Use the Address Book in Crestron Toolbox to create an entry using the
expected serial communication protocol (RS-232, auto-detect baud rate, no
parity, 8 data bits, 1 stop bit, XON/XOFF disabled, RTS/CTS disabled).

•

Display the TPS-12G/15G/17G-QM’s “System Info” window (click the

icon); communications are confirmed when the device information is

displayed.

Indirect

Indirect Communication

SERIAL,

ETHERNET

OR USB

CRESNET

PC RUNNING

CRESTRON TOOLBOX

CONTROL SYSTEM

TPS-12G/15G/17G-QM

•

TPS-12G/15G/17G-QM connects to control system via Cresnet.

•

Establish communications between the PC and the control system as
described in the latest version of the 2-Series Control Systems Reference
Guide (Doc. 6256).

•

Use the Address Book in Crestron Toolbox to create an entry for the
TPS-12G/15G/17G-QM using the expected communication protocol
(Indirect). Select the Cresnet ID of the TPS-12G/15G/17G-QM and the

56

•

Isys

®

G-Series Touchpanels: TPS-12G/15G/17G-QM

Operations Guide – DOC. 6415B

«
...
58
59
60
61
62
...
»

Содержание Isys TPS-12G-QM







































































Отзывы:

Нет отзывов

Похожие инструкции для Isys TPS-12G-QM

UN55B7000 - 55" LCD TV

Бренд: Samsung Страницы: 8

Бренд: Worcester Страницы: 40

Бренд: Renogy Страницы: 20

ELDORA VSPG.60 Series

Бренд: vikram solar Страницы: 15

Бренд: Fagor Страницы: 94

Бренд: CoolSky Страницы: 68

Бренд: GE Страницы: 38

37MF321D - Hook Up Guide

Бренд: Magnavox Страницы: 38

Бренд: COMECO Страницы: 12

Бренд: IEI Technology Страницы: 22

Бренд: NEO TOOLS Страницы: 33

Бренд: Skyworth Страницы: 20

Бренд: Solon Страницы: 6

Бренд: Solon Страницы: 85

Бренд: i3-TECHNOLOGIES Страницы: 12

Бренд: D2G Страницы: 25

MTSIR321 Series

Бренд: PQ Labs Страницы: 3

Бренд: Daewoo Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды