Crestron Isys i/O TPMC-4X, Руководство по эксплуатации, Страница: 7 / 36

Crestron TPMC-4X Isys i/O
™
Handheld WiFi Touchpanel
Applications
The following diagram illustrates a basic configuration that connects a TPMC-4X
WiFi touchpanel to a control system via a wireless access point (WAP).
•
The distance between the TPMC-4X and the dedicated WAP should not exceed
30 feet. The TPMC-4X is not a roaming device.
•
Use a dedicated wireless router/access point for each TPMC-4X device.
•
Each TPMC-4X must have only a single dedicated WAP listed in its Preferred
Networks list. Refer to the “WLAN Settings” Window – Config Tab instructions
on page 15.
The diagram on the next page presents a more complex configuration. In this
scenario, the WAP is connected to port B of the control system’s C2ENET-2 card.
Port A is connected to the corporate LAN. The card’s internal firewall controls data
flow thus isolating the two subnets.
NOTE: When using a dual-port Ethernet card, Ports A & B must be different
subnets (e.g., Port A = 128.x.x.x; Port B = 192.x.x.x).
For additional information on setting up and understanding an Ethernet network,
refer to the latest version of the Crestron e-Control Reference Guide (Doc. 6052),
which is available from the Crestron website (http://www.crestron.com/manuals).
Operations Guide – DOC. 6499 Isys i/O
™
Handheld WiFi Touchpanel: TPMC-4X
•
3