background image

 

4  

  DM-TX-4K-202-C/DM-TX-4K-302-C: 4K DigitalMedia 8G+ Transmitters 

Supplemental Guide – DOC. 7932A 

Side View, Right 

The following illustration shows the right side of the DM-TX-4K-302-C. 

NOTE:  The right side of the DM-TX-4K-202-C provides the same connectors, controls, and 
indicators as the right side of the DM-TX-4K-302-C. 

Side View, Right (DM-TX-4K-302-C Shown) 

 

 

USB HID:  USB Type A female; 

USB 2.0 host port for connection of a mouse, keyboard, or other USB HID compliant 
device (USB signal extension and routing), or for connection of a Crestron TT-100 series 

device (Crestron Connect It™ Cable Caddy. sold separately) 

 

COMPUTER:  USB Type B female; 
USB 2.0 device port for computer console (setup) or for connection to a computer or 

other USB HID compliant host (USB signal extension and routing) 

 

LAN:  8-pin RJ-45 female; 

10BASE-T/100BASE-TX Ethernet port; 

Green LED indicates Ethernet link status; 
Amber LED indicates Ethernet activity 

NOTE:

  Do not connect the LAN port to an Ethernet switch if the DM OUT port 

connects to a DigitalMedia™ switcher. 

 

HDMI OUT:  19-pin Type A HDMI female; 
HDMI digital video/audio output (DVI compatible) 

NOTE:

  The HDMI OUT port requires an appropriate adapter or interface cable to 

accommodate a DVI signal. The CBL-HD-DVI interface cable is available separately. 

 

HDMI OUT LED:  Green LED, indicates HDMI signal presence at the HDMI output

 

 

COM:  5-pin 3.5 mm detachable terminal block; 
Bidirectional RS-232 port; 
Up to 115.2k baud, hardware and software handshaking support

 


Содержание DM-TX-4K-202-C

















Отзывы: