The Crestron®
is a DigitalMedia 8G+® wall plate
receiver and room controller that provides a simple, cost-effective
interface solution for a single display device as part of a complete
Crestron® DigitalMedia™ system.
In the Box
1
DM-RMC-4K-100-C-1G Wall Plate DigitalMedia 8G+®
Receiver and Room Controller 100
Additional Items
1
Bracket, Surface Mount (2016054)
2
Connector, 2-Pin (2003574)
1
Connector, 3-Pin (2003575)
2
Screw, 6-32 x 1/4 in., Pan Head, SEMS (2007218)
2
Screw, 6-32 x 3/4 in., Truss Head, Combo (2009211)
Install the Receiver
Mount the device into an electrical box, onto a flat surface, or onto a rack
rail. Connect the rear of the receiver before mounting it into an electrical
box. If the receiver is to be mounted onto a flat surface or rack rail,
connect the rear of the unit after it is mounted.
Connecting the Rear of the Receiver
NOTE:
The DM IN port is a PoDM (Power over DM) powered device
(PD) port and is also compatible with HDBaseT® PoE:
l
In order for the DM IN port to receive PoDM, the port must be
connected to a DigitalMedia switcher or other DigitalMedia
equipment that has a PoDM power sourcing equipment (PSE) port.
l
In order for the DM IN port to receive HDBaseT PoE, the port must
be connected to equipment that has an HDBaseT PoE PSE port.
Wiring that connects to a PoDM or HDBaseT PoE port is designed for
intrabuilding use only.
PoDM, HDBaseT PoE, or the optional
power pack (sold
separately) can be used to power the receiver.
1
DM-RMC-4K-100-C-1G
Quick Start
Wall Plate 4K DigitalMedia 8G+® Receiver and Room Controller 100
