Crestron DM-NVX-352 Скачать руководство пользователя страница 71

Страница: 71 / 85

Web Interface Guide — Doc.

DM-NVX-352(C) • 65

Time Synchronization

1. Move the Enable Time Synchronization slider to the desired position (On or Off) to specify

whether time synchronization will be enabled (On) or disabled (Off). By default time
synchronization is set to On.

2. In the Time Server field, enter the URL of the NTP or SNTP server.

3. Click Synchronize Now to perform time synchronization between the device's internal clock

and the time server.

Time Configuration

1. Click on the Time Zone drop-down to select the applicable time zone.

2. In the Time (24hr Format) text field, enter current time in 24-hour format.

3. In the Date text field, enter the current date.

Click the Save Changes button to save the settings.

Click the Revert button to revert to the previous settings without saving.

Discovery Config

Move the Discovery Agent slider to Enabled or Disabled to specify if the DM-NVX-352(C) will be
discoverable or not. When Discovery Agent is enabled the DM-NVX-352(C) will be displayed in the
Available Streams lists of other receivers.

If you would like to use a custom TTL value, select the Custom TTL option and then enter the value
in the TTL field.

Содержание DM-NVX-352






















































































Результаты поиска

Содержание DM-NVX-352

Отзывы:

Crestron DM-NVX-352, Инструкция по интерфейсу, Страница: 71 / 85

Результаты поиска

Содержание DM-NVX-352

Отзывы: