Crestron DM-NVX-352 Скачать руководство пользователя страница 67

Страница: 67 / 85

Web Interface Guide — Doc.

DM-NVX-352(C) • 61

To Upgrade the Firmware of the DM-NVX-352(C):

1. Click the Upload Firmware File radio button if you wish to upload a firmware file located on

your PC.

2. Click Firmware Upgrade.

3. In the Firmware Upgrade dialog, click the Browse button.

4. Locate and select the desired firmware file, and then click the Open button. The Upload

firmware file text field displays the selected firmware filename.

5. Click the Load button and wait for the progress bar to complete and for the OK button in

the message to become clickable.

6. Click OK. The device with new firmware can now be accessed.

The Maintenance section of the Device page allows rebooting or restoring the DM-NVX-352(C) to
factory default settings.

Restoring Factory Default Settings

1. Click the Restore button to restore the settings of the DM-NVX-352(C) to factory defaults.

NOTE:

When settings are restored, all settings, including the network settings, will revert

to the factory default settings. If a static IP address is set, restoring the device to factory
default settings will revert the IP address to DHCP mode, which is the factory default
setting.

2. Click Yes in the Restore dialog to restore the DM-NVX-352(C) to factory settings.

The Restore dialog is displayed again, indicating that the Restore process was successful
and that the device rebooted.

Alternatively, click No to cancel the restoring operation and return to the Device page.

Содержание DM-NVX-352






















































































Результаты поиска

Содержание DM-NVX-352

Отзывы:

Crestron DM-NVX-352, Инструкция по интерфейсу, Страница: 67 / 85

Результаты поиска

Содержание DM-NVX-352

Отзывы: