Supplemental Guide – DOC. 7718B
DM-MD8X1-4K-C and HD-MD8X1-4K: 4K Scaling Auto-Switchers
•
9
Display Mode
The display mode of an image can be set to one of the following:
•
Maintain aspect ratio
•
Stretch to fit
•
1:1 pixel mapping
•
Zoom
To configure Display Mode settings, use the web interface or SIMPL Windows as discussed
in the following sections.
Configuration Using the Web Interface
An overview of the steps necessary to configure the display mode is as follows:
NOTE:
For detailed information, refer to the online help of the web interface.
1.
On the Main Setup page, click the INTERNAL SCALER Settings button.
The Output Configuration page for the internal scaler opens.
2.
In the Display Mode list, click the radio button that corresponds to the desired
setting.
Output Configuration Page for Internal Scaler—Display Mode Configuration
Configuration Using SIMPL Windows
Using SIMPL Windows, set the display mode in subslot 02 of the Outputs slot. To do so,
set the <Scaler_Display_Mode> analog input join to the desired value.
NOTE:
For detailed information, refer to the SIMPL Windows help file.
