DigitalMedia™ Room Controller, CAT
Crestron
DM-RMC-100
Setup
Network Wiring
When wiring the DMNet network, consider the following:
NOTE:
DMNet wiring and Cresnet
®
wiring are not compatible.
•
Use Crestron Certified Wire.
•
Use Crestron power supplies for Crestron equipment.
•
Provide sufficient power to the system.
CAUTION:
Insufficient power can lead to unpredictable results
or damage to the equipment. Please use the Crestron Power
Calculator to help calculate how much power is needed for the
system (
).
•
For DigitalMedia CAT wiring, use DM-CBL DigitalMedia Cable.
Up to two DM Repeaters (model DM-DR, sold separately) may be
required. Refer to the latest revision of the Crestron DigitalMedia
Design Guide (Doc. 4789) for complete wiring guidelines.
For more details, refer to “Check Network Wiring” which starts on page
34.
The DM-RMC-100 can also use high-speed Ethernet for communications
between the device and a control system, computer, media server and
other IP-based devices.
For information on connecting Ethernet devices in a Crestron system,
refer to the latest version of the Crestron e-Control
Reference Guide
(Doc. 6052), which is available from the Crestron Web site
(
18
•
Room Controller, CAT: DM-RMC-100
Operations & Installation Guide – DOC. 6743-1F
