3. Finger-tighten the two captive panel screws to secure the card—do
not overtighten the screws.
Connect the Card
Connect the card as required for the application.
NOTES:
l
The cards can be configured to use either the DEVICE port or the
HOST port. Both ports cannot be used simultaneously.
l
The DM-NVX-350C and DM-NVX-351C each provide three LAN
ports. LAN ports 1 and 2 are 100BASE-TX/1000BASE-T ports.
LAN port 3 is an SFP port.
l
The DM-NVX-352C provides two LAN ports. LAN port 1 is a
100BASE-TX/1000BASE-T port. LAN port 2 is an SFP port.
l
An SFP port connects to a fiber-optic network using the
appropriate Crestron SFP-1G Series transceiver module (sold
separately). For information about installing a Crestron SFP-1G
transceiver module, refer to the SFP-1G Series Installation Guide
(Doc. 7979) at
l
Only one LAN port at a time can be used as the primary LAN
connection to a 1000BASE-T switch in order to stream network
video. Any other LAN port can then be used for connection to a local
network device or to another DM NVX device.
2
DM-NVX-350C, DM-NVX-351C, and DM-NVX-352C
Quick Start
DM NVX® 4K60 4:4:4 HDR Network AV Encoder/Decoder Cards
