DO
GUIDE
3. Using the four included 6-32 x 1” Phillips pan head screws, attach the DM-RMC-200-C to
the support bracket.
Inserting the Power Pack into the Power Pack Holder
To insert the power pack into the power pack holder, do the
following:
1.
Position the power pack between the left and right
flanges and behind the bottom flange of the power
pack
holder.
2.
Using the included 6-32 x 1/2” Phillips pan head screw,
thread the screw through the hole in the top flange of
the
power pack holder to hold the power pack in place.
3.
Using one of the included tie wraps, thread the tie wrap
through the hole in the right flange of the power pack
holder, and then fasten the tie wrap to the power pack
cable.
DM-RMC-200-C
DigitalMedia 8G+
®
Receiver and Room Controller 200
DO
Install the Device
The Crestron
®
DM-RMC-200-C mounts into a 2-gang electrical box using the included support
bracket. The support bracket provides a holder for the included power pack.
Mounting the Device into an Electrical Box
To mount the device into an electrical box, do the following:
1. Using the four included 6-32 x 3/4” combo truss head screws, attach the included support
bracket to the electrical box.
2. Ground the DM-RMC-200-C and attach the proper cables to the back of the unit.
DO
Check the Box
QTY PRODUCT
COLOR
PART NUM.
2
Connector, 2-Pin
2003574
4
Connector, 2-Pin
2003582
2
Connector, 4-Pin
2003576
1
Connector, 5-Pin
2003577
1
Power Cord, 5' 10" (1.78 m)
2042043
1
Power Pack, 24 Vdc 2.5 A, 100-240 Vac
2041865
1
Screw, 6-32 x 1/2”, Pan Head, Phillips
Black
2007238
4
Screw, 6-32 x 1”, Pan Head, Phillips
Black
2007250
4
Screw, 6-32 x 3/4", Truss Head, Combo
2009211
1
Bracket, Support
2042429
2
Tie Wrap, Cable Tie, 15 1/2" x 1"
Black
2013608
Not Included: Cables
Tie Wrap
Hole
Amplified Stereo
Audio Output
From DM
®
Switcher,
Transmitter, or
Other DM Device or
from HDBaseT
®
Device
1
Software
Programmable
Digital Input
To Relay
Controllable
Devices
Ground
