background image

DO

 

GUIDE

DOC. 7816C (2044621) 05.17

Specifications subject to change without notice.

DO

 Learn More

Visit the website for additional information and the latest firmware updates. To learn 
more about this product, use a QR reader application on your mobile device to scan 
the QR image.

Crestron Electronics

 

15 Volvo Drive, Rockleigh, NJ 07647 
888.CRESTRON | www.crestron.com

As of the date of manufacture, the product has been tested and found to comply with specifications for CE marking.

 
This product is Listed to applicable UL

®

 Standards and requirements by Underwriters Laboratories Inc. 

Ce produit est homologué selon les normes et les exigences UL applicables par Underwriters Laboratories Inc.

 

 

Federal Communications Commission (FCC) Compliance Statement 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference 
that may cause undesired operation.

CAUTION:

  Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the 

user’s authority to operate the equipment.

NOTE: 

 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the 

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not 
occur in a particular installation. 

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

 

• Reorient or relocate the receiving antenna.

 

• Increase the separation between the equipment and receiver.

 

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 

• Consult the dealer or an experienced radio/TV technician for help.

Industry Canada (IC) Compliance Statement 

CAN ICES-3(B)/NMB-3(B)

The DM-RMC-100-S is a Class 1 laser product. It complies with safety regulations of IEC-60825-1,  
FDA 21 CFR 1040 11, and FDA 21 CFR 1040 10.

WARNING:

 Visible and invisible laser radiation when open. Avoid direct exposure to beam.

NOTE:

 Plug the included dust cap into the optical transceiver when the fiber optic cable is unplugged.

The specific patents that cover Crestron products are listed at 

patents.crestron.com

The product warranty can be found at 

www.crestron.com/warranty

.

Certain Crestron products contain open source software. For specific information, please visit 

www.crestron.com/opensource

Crestron, the Crestron logo, Crestron Toolbox, DigitalMedia, DigitalMedia 8G, and DM are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States  
and/or other countries. HDMI is either a trademark or registered trademark of HDMI Licensing LLC in the United States and/or other countries. UL and the UL logo are either trademarks or 
registered trademarks of Underwriters Laboratories, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document 
to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for 
errors in typography or photography.
This document was written by the Technical Publications department at Crestron. 
©2017 Crestron Electronics, Inc.

Отзывы: