Docking Assembly for STX-1550CW Crestron
DA-1550CW
10
••
Docking Assembly for STX-1550CW: DA-1550CW
Operations & Installation Guide - DOC. 5930
BB/DA-1550CW Symbol Input Description
INPUT
FUNCTION(S)
UNLATCH
(Unlock in earlier
versions of SIMPL
Windows.)
Edge sensitive. Unlatches the back box for 5-seconds when the
edge of the signal is received. After the 5-seconds has expired,
the latch engages. The back box may not be unlatched for
1-second after the latch is engaged.
BB/DA-1550CW Symbol Output Descriptions
OUTPUTS
FUNCTION(S)
UNLATCHED
1
when the latch is open,
0
when the latch is closed.
(Unlock-FB in earlier
versions of SIMPL
Windows.)
PANELPRESENT
1
when the touchpanel is docked,
0
when the touchpanel is not
docked.
CHARGING
1
when the touchpanel is docked and the ST-BTP is charging,
0
otherwise (i.e. done charging, touchpanel not docked).
CHARGEDONE
1
when the touchpanel is docked and charging is complete,
0
otherwise (i.e. still charging, touchpanel not present).
CHARGEFAULT
1
when there is a charge fault (i.e. hardware problem with the
touchpanel, poor contact with the charger, a network voltage
problem, etc.),
0
when no fault is present.
Example Program
An example program for the DA-1550CW is available from the Downloads page
(EXAMPLES Library) of Crestron’s website (www.crestron.com). Search for
DA1550CW.ZIP that contains the example program, associated files and a
README.TXT file that describes the program. New users are required to register in
order to obtain access to the FTP site.
Operation
The DA-1550CW docks the STX-1550CW touchpanel, provides power and
communication, and recharges the ST-BTP. Operation consists of docking the
touchpanel (performed by hand) into the DA-1550CW or undocking electrically via
the control system and then removing by hand. Provisions have also been
incorporated to allow the touchpanel to be undocked manually.
Normal Operation
Normal operation of the DA-1550CW is described in the next two sections.
Docking the STX-1550CW
Docking of the STX-1550CW is performed by hand by inserting the bottom edge of
the touchpanel into the DA-1550CW and snapping it into place. To dock the
touchpanel, refer to the procedure on the next page.
NOTE:
Do
not
dock the STX-1550CW into the DA-1550CW without the ST-BTP
being installed in the touchpanel. Operating power for the DA-1550CW is supplied
through the electrical contacts of the ST-BTP. If the ST-BTP is not installed, the
DA-1550CW will not electrically unlatch the touchpanel.
