background image

Original Instructions
The U.S. English version of this document is the original instructions.
All other languages are a translation of the original instructions.

Crestron product development software is licensed to Crestron dealers and Crestron Service Providers (CSPs) under a
limited nonexclusive, nontransferable Software Development Tools License Agreement. Crestron product operating
system software is licensed to Crestron dealers, CSPs, and end-users under a separate End-User License Agreement.
Both of these Agreements can be found on the Crestron website at

www.crestron.com/legal/software_license_

agreement

.

The product warranty can be found at

www.crestron.com/warranty

.

The specific patents that cover Crestron products are listed at

www.crestron.com/legal/patents

.

Certain Crestron products contain open source software. For specific information, visit

www.crestron.com/opensource

.

Crestron, the Crestron logo, 4-Series, Cresnet, Crestron Home, and Crestron Toolbox are either trademarks or registered
trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered
trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not
responsible for errors in typography or photography.

©2022 Crestron Electronics, Inc.

Содержание Cresnet Network































Отзывы: